Pneumatic Pump is a new type of transport machinery, is the most novel type of pump in China.Using compressed air as the power source, all kinds of corrosive liquids, granular liquids, high viscosity, volatile, inflammable, highly toxic liquids can be exhausted by light absorption.Invented by American engineer William wilton, the pneumatic pump was introduced to China.There are five kinds of materials commonly used: plastic, aluminum alloy, cast iron, stainless steel and teflon.According to different liquid media, Diaphragm Pump adopts buqing rubber, chloroprene rubber, fluoro rubber, polytetrafluoroethylene, polytetrafluoroethylene respectively.The early domestic customers bought through the importer agent, the price is expensive and the maintenance is complicated.With the development of industry, the market share of domestic Pneumatic Diaphragm Pump has exceeded that of imported products.In order to install in a variety of special occasions, used to pump a conventional pump can not pump the medium, all achieved satisfactory results. Mine Pneumatic Pump,Pneumatic Pump,Pneumatic Mining Water Pump,Pneumatic Sump Pump Jining Dongda Electromechanical Co.,Ltd. , https://www.coal-mine-equipment.com
The following is a brief introduction of a small plastic sealer for everyone:
1. The small plastic sealing machine is composed of a frame, a deceleration speed-regulating transmission mechanism, a heating and cooling mechanism, a sealing and printing mechanism, a conveying device and an electric and electronic control system.
2. Turn on the power and all agencies start working. The heating element is heated after being energized, so that the upper and lower heating blocks are heated up sharply and adjusted to the desired temperature through the control system; the embossing wheel rotates; the cooling system starts cooling as required; the conveyor belt is transferred and adjusted by the speed-regulating device to the desired speed .
3. When the package containing the article is placed on the conveyor belt, the sealing part of the bag is automatically sent into the two sealing belts in operation and brought into the heating zone. The heat of the heating block is transmitted to the sealing part of the bag through the sealing tape. The film is heated and melted, and then passes through the cooling zone, so that the surface temperature of the film is appropriately lowered, and then the knurling wheel (or printing wheel) is rolled to adhere the upper and lower plastic films of the sealing part and press a mesh pattern (or printing The sign), and then the guide rubber belt and conveyor belt will send the sealed package out of the machine to complete the sealing operation.
Small plastic sealer instructions
Small plastic sealing machine is the use of electromagnetic induction principle, the aluminum foil on the bottle mouth instantly generate high heat, and then fused in the bottle, so that it reaches the sealing function, with good moisture, mildew, anti-counterfeiting effect, play to extend the preservation of goods For the purpose of the cycle, Hengheng Small Plastic Sealing Machine is suitable for sealing and bagging of various plastic films, and can be widely used in food, medicine, cosmetics for daily use, native products, chemical industry, electrician originals, military, clothing, heritage preservation, etc. department. It is the ideal sealing equipment for batch use in factories, shops and service industries. The material of small plastic sealer containers can be plastic (PE), (PP), (PET), (PS), ABC and glass, etc. Metal bottle body and cap. (The company also provides induction foils for various materials.)