Technology development improves the performance of armored command vehicles

An armored command vehicle is a type of military vehicle that is commonly used in combat operations. There are mainly two modes. One is tracked, and the other is wheeled. No matter which kind can play a good military command role.

3_副本1.jpg

With the development of science and technology, armored command vehicles have also been correspondingly improved. After improvement, applicability has obviously improved. The most important manifestation is in the following three aspects:

In the first aspect, the improved communication functions of the armored command vehicle have been improved and the means of communication have increased significantly. As there is a certain difference between the armored command vehicle and other command vehicles, it is this special purpose that has higher requirements for the armored command vehicle. Armored command vehicles often have poor access to the environment. In order to be on the safe side, a variety of communication networks such as radio stations and field-limited communication equipment should be installed on armored command vehicles to meet the requirements of harsh environments and ensure the communication of armored command vehicles. Features. After perfecting and developing, the satisfaction of communication means naturally improves the communication function of the armored command vehicle. No matter how bad the environment is, it can complete communication and transfer information out.

4_副本.jpg

In the second aspect, the widening of the observation horizon can satisfy the commander’s need to observe the battlefield in all directions and ensure that commanders have full knowledge of the situation on the site. Army combat itself is an overall event. Knowing the specific situation ahead can only make appropriate choices to complete the command.

In the third aspect, the interior environment of the command vehicle has been improved. In order to provide commanders with a more comfortable environment to meet the demands of long-term command, it is necessary to improve the environment of the armored command vehicle . Under the conditions of the winter and summer heat, it is not conducive to in-vehicle operations. By installing a heating and cooling system in the vehicle, the interior environment of the vehicle is significantly improved.

The development of science and technology is to use it to change people's lives and work environment. The science and technology in the armored command vehicle is a good example of this, and the armored command car is more suitable for combat command.


Brief Introduction & Working Principle

when compressed air enter into the vacuum pump, simultaneously under the push of air cylinder, the empty door of hopper will be closed and the vacuum will be formed in the hopper. The vacuum feeding machine forms air stream under vacuum state. Under the action of this air steam the material which is conveyed will be transported to vacuum hopper through hose. Certain time later (feeding time, adjustable), the compressed air is closed, the pneumatic vacuum pump is unable to produce vacuum, simultaneously under the push of air cylinder the emptying door of hopper will be opened and the vacuum will be disappeared in the vacuum feeder. The material will be fed into receiving equipment from the emptying door (for example tablet press, packing machine and so on), simultaneously, compressed air that stores up in air packet's blowback the filter, and the filter cleans by itself. Certain time late (discharging time, adjustable), the compressed air starts again. Move in cycles, the material is fed into the equipment continuously.



The machine is well designed and produced, consisted of vacuum pump (non-oil & non-water), stainless-steel-made product sucking mouth, feeding tube, cloth filter (or 316 stainless steel filter), vibration cleaner (or compressed air blower), vacuum product hopper and product level control system. There are some different between when machine combined with packaging machine, pellet pressing machine and Mixing Machine respectively.



Feature


* With high standard(GMP standard,sanitary grade and food grade)

* Made of nontoxic and corrosion resistant materials

* Materials are not adhering to the inner surface of conveyor

* Intelligent control and high automation

* Modular structure,Easy to Clean and dismantle.

* Low noise and non-vibration

* More flexible to connect with packaging machine,mixers,crusher,mills,etc.

* Lower price compared with screw conveyors

* Good choice for powder,small pellet and fragile materials

* Low Energy Consumption




Our machines have an automatic 12 months guarantee against faulty material and workmanship valid from the date of dispatch in China or date of arrival at foreign border.

If any problem of the machine under instruction within one year,we are responsible for replacement incuding delivery fee and maintenance.

Lifelong service is offered with cost charge after one year.


Vacuum Conveyor

Vacuum Conveyor

Vacuum Conveyor ,Vacuum Transfer System,Vacuum Transfer,Pneumatic Vacuum Conveyor

XINXIANG CHENWEI MACHINERY CO.,LTD , https://www.sieves.nl