Do you really open the car heating?

Introduction: The temperature has continued to drop over the past few days, the weather is getting colder and colder, especially the northern partners should be more deeply touched, especially in the morning to work, into the car seemed to be splashed with cold water, the frequency of use of warm air It is high.

Do you really open the car heating?

Looks like a simple operation, but are you really using it? Come today and chat with everyone about using warm tips in the car.

1. Don't just start the car and turn on the warm air Many friends will get into the car. Because of the cold, the warm air will be turned on immediately after the start of the car. However, this is actually not very good, because the car has just started running. In the engine operation time is not long, so the tank temperature is still relatively low. When the temperature of the water tank does not rise, turning on the warm air of the car will burden the engine.
Correct practice: Let the car run for a while and wait until the water temperature indicator reaches half of the normal water temperature before starting to use the warm air.

2. Open inner loop or outer loop?
After the warm air is turned on, everyone will find that the car will not warm up immediately. It will take some time. How can we speed up the temperature increase in the car?
Correct practice: You can use the inner cycle first to allow the temperature in the car to rise faster. When the temperature rises, it is replaced with an outer cycle to ensure the air circulation in the car.

3. Do not open the A/C key switch in the car. The warm air that we turn on is actually recycling and radiating the heat generated by the engine during operation to the inside of the car. There is no need to start the car's compressor for additional heating. Therefore, when using the warm wind during driving in winter, you must remember that you only need to turn on the air-conditioner button. Do not open this A/C key switch.
Correct practice: It is possible to directly adjust the air volume and set the temperature.

5. Air outlet Do not directly face the face of the warm air outlet Do not directly face the face, because the prolonged use of hot air, the car's air will be very dry, relatively large damage to the skin.
Correct practice: Due to the principle of cold air sinking and hot gas rising, the use of warm air should adjust the tuyere down.

6. The warm air can remove the window fog. When the temperature difference between the inside and outside of the car is large in winter, the windshield of the car is prone to fog, which seriously affects the driving safety.
Correct practice: Turn on the warm wind and adjust the wind direction to the position where the windshield is blown forward. The window fog can be quickly removed.

Hollow Fiber Membrane Mold

Hollow Fiber Nozzle,Corrosion Resistant Hollow Fiber Nozzle,Spinneret For Hollow Fibe,Hollow Fiber Membrane Mold

Changzhou Jier Precision Machinery Manufacturing Co., Ltd. , https://www.jier-spinneret.com