Su coal chemical major equipment to complete the installation within the year

The reporter learned from Huating County, Pingliang City, Gansu Province that the Gansu Huating Zhongyu Coal Chemical Co., Ltd., the largest coal chemical project in Gansu Province, had an annual output of 600,000 tons of coal-made methanol. The project is progressing smoothly and major equipment can be installed within the year.
Up to now, most of the 600,000 tons of coal-to-methanol projects with a total investment of 2.899 billion yuan have basically completed the excavation of pipeline networks and the construction of vaporization equipment. The project design, equipment ordering, and the introduction of major process software have been completed and the various types of contracts have been signed. The amount of the contract was 870 million yuan. The entire project completed an investment of 400 million yuan, and major equipment installation can be completed within the year.
The project is located in Shibaozi Development Zone, Huating County, Gansu Province and is scheduled to be completed and put into operation in early 2009. After the completion of the project, the annual coal consumption will be 1.62 million tons, the average annual sales income will be 1.06 billion yuan, and the total annual profit and tax will be 420 million yuan. It will have high profitability and risk resistance. After the project is put into production, it will gradually form a methanol fine chemical industry zone and realize the extension of the methanol industry chain. In the long term, it will also start the methanol to olefins project and realize the preparation of petrochemical products from the coal chemical route.
Huating County of Gansu Province is one of the 13 coal production bases in the country and one of the three largest coal production bases in the northwest. It has rich coal resources, domestic reserves of 2.2 billion tons, and storage capacity of 1.8 billion tons. It is low-ash, low-phosphorus, low-sulfur, and highly volatile. High-tech, high-calorie, high-quality power chemical coal is one of the only five high-quality chemical coal bases in the country.

Photobank 1

Dust filter cages construction typically consist of 10, 12 or 20 longitudinal wires. The horizontal ring spacing on cages can be 4″, 6″ or 8″. If plenum height restrictions are a problem, two piece cages are available in popular 'twist-lock' or 'fingers' styles. For areas where moisture or acid corrosion present we can provide a range of materials, often galvanized steel or stainless steel. Top load filter cages are available with a T-flange, ring top or several styles of rolled flange tops. Cage diameters range from 4″ to 6 1/8″. Wire thickness ranges are 9 gauge, 10 gauge and 11 gauge. Cages for bottom load baghouses are constructed with a split collar or split ring top. Cage diameters range from 4″ to 6 1/8″. Wire thickness ranges are 9 gauge, 10 gauge and 11 gauge. For more efficient cleaning, Venturi are available for all diameter cages. Venturi comes in 3″ to 6″ lengths. Venturi are made in a variety of materials including aluminum, carbon steel, galvanized and stainless steel. Our dust collector cages can be made to fit existing collectors from any baghouse manufactures such as Astek, Gencor, Flexkleen, Mikropul, Wheelabrator, etc. We can also manufacture uncommon and specialized cage designs as required

Dust Filter Cage

Baghouse Cages,Filter Bag Cage,Baghouse Filter Cages,Dust Collector Filter Cage

Botou Ever Lucky Environmental Protection Machinery Co., LTD , https://www.dustcontrolling.com