The transport of timber is related to economic infrastructure. For large timber transporters, the transport efficiency of timber should be improved so that better economic benefits can be achieved. So how can we make large timber transporters improve the efficiency of transporting wood? We need to optimize the transport program, which can be considered from the following aspects. First, the wood is roughed. In order to maximize the amount of wood on the transporter , the timber should be roughed to a certain degree, and the wood should be made into a neat shape, and the excess branches should be cut off. Uniform wood can save more space and can be placed on a larger number of vehicles. The processing of wood does not need to be too elaborate, as long as the irregular shape can be trimmed off. In addition, do not process the wood too carefully during processing because the use of the wood cannot be determined, so there is no need for fine processing. Second, make certain modifications to the transport vehicle. If the transporter cannot meet the shipping requirements of the wood, the vehicle can be properly modified. However, it should be noted that the modification of the vehicle should comply with the relevant requirements. The vehicle's power system cannot be modified at will, only the size of the vehicle body can be modified, and the maximum capacity of the vehicle cannot be exceeded, otherwise it is easy to be transported. There is a dangerous situation. Modification of the vehicle is not a simple matter. It should be based on the needs of the use of a reasonable design, and to ensure the quality of the modified, so that it can be a smooth and safe transport of timber to the desired place. Third, the transport of wood is reasonably placed. The reasonable placement of wood can also save a certain amount of space. Orderly placement can allow vehicles to accommodate more wood. According to the experience, reasonable lengths and lengths of wood should be placed to make full use of the space inside the carriage so as to increase the efficiency of single transportation. In addition, after placing, the wood on the car should be fixed. In particular, the log must be fixed in the interior of the carriage. Otherwise, it may easily fall off during transportation, which may cause certain risks. Aluminum Microwave Antenna FEATURES: Aluminum Microwave Antenna Aluminum Microwave Antenna,Mobile Communication Microwave Antenna,Parabolic Microwave Antenna Zheke Mould Technology Co. Ltd. , http://www.zkdiecasting.com
By Computer Numerical Control machine, it can calculate precisely and then cut the metal material into your wished shape.
The benefits are highly automatic operation, save cost of tooling. Also, the restriction of shape is not so strict. The application is mostly in the field of telecom or good out looking cases.
â— Processing technique: Punching, riveting, tapping, CNC, drill, milling and lathing
â— Up-to-date equipment: CNC lathe, CNC milling, stamping machine, automatic lathe, grinder, thread rolling machine, tapping, drilling machine, bending machine