Yongtong Copper Concentrator C-30 Fluorescence Analyzer Successfully Renovated

The Jiangxi Copper Group Yongping Copper Mine Concentrator has organized the staff to renovate the C-30 fluorescence analyzer cooling system of the plant, which not only eliminates the safety hazards in the use of the equipment, but also effectively improves the performance of the equipment and instruments. Considerable economic benefits.

The C-30 fluorescence analyzer is an important equipment for the analysis and testing of the beneficiation process parameters of the plant, and the X-ray tube is the core component of the instrument. When the X-ray tube is working normally, the temperature must be kept below 57 °C to ensure the normal detection of the C-30 fluorescence analyzer.

Since the X-ray tube that is currently used is a new type of spare part that has been recently replaced, its structural performance is different from the original one. The original cooling system cannot cool and cool the new spare parts well, so that the X-ray tube is often in a temperature critical alarm during operation. The trip of the state must be initiated by the personnel after manual resetting, which seriously affects the service life and analysis accuracy of the equipment, and increases the influence of the radiation and high-frequency voltage of the instrument due to the unpacking start. Security risks.

In response to this situation, the plant organized the fluorescent team with the assistance of relevant technical personnel, actively consulted the technical data, worked out a reasonable transformation plan, and used the air conditioning compressor refrigeration principle to perform three-stage cooling on the analyzer X-ray tube cooling system. Reconstruction, and design the temperature control circuit by itself, so that the temperature of the cooling system is constant at the range of 18 ° C ~ 24 ° C spare parts design, so that the temperature of the X-ray tube is maintained at about 50 ° C, effectively improving the performance of the X-ray tube, and ensuring The normal operation of the analytical instrument ensures the accuracy of the analysis of the beneficiation process parameters.

Lc Screw Air Compressor

    LC series rotary screw Industrial Air Compressors are available from 10 to 175 hp with capacities from 1 to 24 m³/min, and pressures up to 15bar. All units are fully packaged, ready for operation. With sound levels as low as 63 dB(A), our compressors offer the best in quiet operation, energy efficiency, and reliability.


LC Screw Compressors

Ip 55 Screw Compressors,37 Kw Screw Air Compressors,60 Hp Screw Air Compressors,Vsf Screw Air Compressors

ZHEJIANG SHANHAI MACHINERY CO., LTD. , http://www.sunhi-mach.com