The scale setting of the rotating shaft position helps uniform and precise adjustment, the internal bubble changing structure, high-quality dustproof and waterproof performance, and the rear-replaceable light source can be used to easily replace the light source and clean the explosion-proof glass and reflective without moving the color changer. Surface, solid light, good seismic performance, firm and reliable. Energy saving, economical and maintenance free. Dynamic color control, adjustable brightness and darkness, LED combination of three primary colors can be used to achieve color change. LED has a strong directionality of light, high utilization of light flux, and small size. The integrated explosion-proof floodlight is easy to control the design and light intensity distribution of LED explosion-proof lamps. Overall, efficient, energy efficient and safe. It is introduced into the terminal through a rubber seal ring, and the introduced cable is pressed with a compression nut to seal it and prevent it from being pulled out. Before use, check that the wiring is correct and that the fastening screws (bolts) on the housing are tightened. The cable ground wire should be grounded reliably.
If the sealing ring and sealing gasket of the introduction device are found to be aging, they should be replaced in time to ensure the protection performance. The surface mount technology is used to greatly improve the thermal conductivity. The honeycomb light distribution structure is carefully designed to effectively improve the efficiency of the integrated explosion-proof floodlight . The constant current drive is used, which has short-circuit and over-voltage protection functions and can be used as normal working illumination. It has emergency function; EB type is simply used as emergency lighting, it is normally closed, emergency lighting can be started immediately when power is off, and it can also be used for external switch control to start at any time during main power failure. It has excellent electromagnetic compatibility and will not cause any interference to other electrical appliances and transmission networks. The power supply itself has excellent anti-electromagnetic interference capability.
Single Girder Bridge Crane is composed of girder weld by steel plate and I steel, end girder, Electric Hoist and traveling mechanism. The electric hoist runs along the lower flange of the I steel of the girder to accomplish article hoisting. It features light structure and easy installation and maintenance, and is widely used in differenct places or hoisting such as factories, warehouses and material yards, capacity from 1t~20t, span length is 7.5m~22.5m(subject to non-standard design according to user's requirements). The classification group is A3,and the operation ambient temperature is -25℃~+40℃.
Single Girder Bridge Crane
Single Girder Overhead Crane,Girder Gantry Crane,Single Beam Crane,Single Girder Underhung Crane
XINXIANG DEGONG MACHINERY CO., LTD. , https://www.degongcrane.com