The world's first 3D printing car has become a reality. Recently, the car "Stradi" took to the streets to try it out. The peculiar appearance attracted many people's attention. "Stradidi" is entirely made of carbon fiber and plastic. It has a sharp outline and is very similar to a sports car. According to the riders who participated in the test drive, the all-gray "Straddy" chassis is as low as a car and has two custom leather seats. On one side of the car body, the 3D printing layer can be clearly seen, but it has been polished very smoothly. The body gives a plastic feel, but it is also very strong. The "local car" company hopes to print larger cars with larger 3D printers, such as 3D printed SUVs. Tpo Photoinitiator,White Powder 95235-30-6,Light Yellow Powder 75980-60-8,Pale Yellow Liquid 84434-11-7 HENAN BON INDUSTRIAL(CHEMICAL) CO.,LTD , https://www.bonchemical.com
The fender printing line of the car is vertical rather than horizontal, because the mudguard is printed separately so that when the mudguard is damaged, the entire chassis does not need to be replaced.
On the interior of the car, the "Stradidi" uses red seats to provide seats that resemble mesh and make it more comfortable. There are two compartments in front of the passenger seat inside the car for storing things.
No seat belts and airbags in the car
Although "Straddy" is a 3D printed car, it does not have a toy or a cheap feeling. The leather metal steering wheel is very firm and the instrument panel is placed on the left. There is flash control on the steering wheel.
Although the interior of the vehicle cannot be fully stretched, the space is sufficient and the chair cannot move forward or backward. When you start your car, you can hardly hear any sound from the engine. At the beginning, there was no movement when the throttle was lighter.
"Straddy" has no seat belts or airbags. The car is very comfortable and smooth, the steering wheel is also very well operated, passengers sit very close to the ground, giving a feeling of racing. The car also runs very smoothly when climbing a hill.
Only use 40 parts for the whole vehicle
In the streets of New York, the production company provided the public with test drive opportunities. According to the producers, the cost of the parts for the entire car is about 3,500 US dollars (about 21,000 yuan).
It is reported that the 3D printing car made by the "local car" company has a production cycle of 44 hours, and the maximum speed can reach 80 kilometers per hour. It is reported that the entire vehicle uses only 40 parts, and rely on electric energy, charging a charge of 3.5 hours, can travel about 100 kilometers.