QUANTUM Bucket Elevators have successfully been installed in a wide range of applications and capacities. From process equipment, handling a few kg /hr to over 2000 t/hr with a vast range of materials. Whether your application requires a heavy-duty high capacity machine or an industrial process elevator for your factory.
We have a wealth of experience in designing the correct bucket elevator for your application and have a standard range of elevators, which can be specifically designed for, more specialised applications.
Our elevators have conveyed high temperature, high wear, abrasive, large lumpy, sticky non-flowing materials, as well as free flowing powders and granules. We supply a standard range of twin chain and belt elevators single or twin bucket design for high capacity applications such as grain, minerals and ore. The selection of the elevator depends on the material characteristics and IBS will be able to advise you and select the elevator most suited to your material and your application.
For some materials and specific applications, Quantum will design in accordance with Australian standards, suitable explosion venting and will design the structure of the elevator to suit the required application. Typical material that requires this consideration would be sugar, flour, grain and coal.
Standard features for all our bucket elevators
• Qty2 1000mm long inspection doors in conveyor leg and return leg in twin leg elevators for easy inspection of belt or chain and replacement of buckets. Inspection hatch will be provided with bolted mesh screen and safety limit switch
• Belt tracking sensor or switch for belt Bucket Elevators
Coupled with our range of standard steel and plastic buckets, elevator chain and fittings, belt tracking switches and sensors we will keep your business moving--
Bucket Elevator,Bucket Conveyor,Elevator Conveyor,Vertical Conveying Elevator Quantum Conveying Systems Yangzhou Co.,Ltd. , https://www.quantum-sino.com
• Gravity elevators
• Positive discharge elevators
• Central discharge slow speed elevators
• Centrifugal elevators
Gravity Type Bucket Elevator
Quantum supply gravity discharge elevators and positive discharge elevators, supplied as close bucket discharge type, central discharge type, or Idler wheel discharge.
Generally a slow speed design gravity bucket elevator is primarily installed for elevating large lumpy & abrasive material. Our standard units are usually chain driven, either friction drive or toothed sprocket.
These elevators offer reliability with minimum wear & a positive discharge emptying of the bucket.
Centrifugal Type Bucket Elevator
Quantum standard range of centrifugal elevators are the most common type of elevator installed to most industries supplied in both belt type or chain type depending on material characteristic and the capacity being elevated and in some case the feeding method of the elevator.
Conveying type
• Segmented tooth sprocket chain type, twin chain or single dropped forged link chain
• Friction chain type elevators, European rolled chain
• Belt elevator. Using rubber belt or 100% polyester solid woven belt, nylon and steel woven belt Typical Construction
• We supply Single leg or Double leg elevators
• Lagged head Pulley
• Slatted return pulley for sticky materials
• Segmented removable sprockets for chain elevators
• Segmented and removable friction pulleys for friction drive elevators
• Fabricated boot and head section assemblies
• Fabricated 3.0m long nominal casings c/w with self-supporting frame and lateral support frames
• Dust tight sealed flanges
• Screw or counterweight tail end take up
Whether the elevator is best suited for toothed sprocket design, friction wheel on conventional belt, IBS will be able to assist with correct selection for the most reliable, maintenance free and cost effective machine to suit your material characteristic and conveying capacity for your particular application.
Types of Buckets readily available
IBS Supply a range of standard off the shelf buckets in a variety of sizes and materials.
Selection of bucket type will depend on material, material characteristics and application. Typical IBS buckets would be plastic-nylon or polyurethane and can be provide FRAS, mild steel fabricated or pressed, stainless steel fabricated or pressed and wear tips for abrasive materials.
Safety and maintenance
• Our equipment is supplied mandatory with anti-roll back device in full load condition
• All inspection doors are fitted with safety limit
• Safety factor of minimum 12: 1 to rated chain pull to installed chain or belt pull under full load stall conditions
• Fully removable split head top section.
• Clean out and inspection doors in Boot section. Self-cleaning boot section optional.
• Under speed sensor and flag disc
• All our equipment is designed to meet Australian Standards
• Selection of correct conveying velocity and material trajectory for centrifugal elevators is critical to the successful operation of a bucket elevator
• Standard wear plates on boot in-feed and head chute discharge.
• Designed to operate no more than 70% water level of selected bucket at normal operation.
• Installed power capable of full load start up under full bucket surge capacity.
• Our bucket elevators are designed for dust tight design, with suitable dust extraction points
• All our bucket elevators are designed to be self-supporting and are provided with lateral support bracing at approx. 10m centres
Replacement parts service
We can provide a range of standard bucket elevator parts using our standard head and tail pulley assemblies, conveyor belting, elevator butt straps, conveyor bolts and fittings, belt-splicing fittings.
Quantum can provide a customised service contract using experience technicians with many years` experience in servicing and troubleshooting bucket elevators in most states. This service ensures that your equipment is functional to its optimum capabilities and reduces down time parts replacement and potential damage.Our technicians have standard customer maintenance, checking and reporting procedure.
Air compressor accessories explain
Air compressor parts are more general terms. Air compressors are divided into piston air compressors and screw air compressors according to the working principle. Piston air compressor parts mainly talk about some conventional accessories. Piston air compressor parts are divided into Vulnerable parts, such as piston rings, support rings, valve plates inside the valve block, pistons, piston rods, large head tiles, coolers, etc. Durable parts include cylinder blocks, cylinder heads, seals, brakes, oil pumps, safety valves, etc. Etc., and the screw air compressor is different from the piston air compressor. The working principle of the screw air compressor is different from that of the piston air compressor. The design is different. The screw compressor air compressor has the oil filter and the air filter. , solenoid valve, engine oil, etc., the screw of the general screw machine air compressor is not easy to damage, and the service life is relatively long. Air compressor parts, piston machine parts, piston, piston ring, connecting rod, crankshaft, bearing bush, cylinder sleeve, valve block, pressure switch, air filter, etc., rotor liquid, air filter, oil filter, oil separator , pressure valve, temperature control valve, intake valve, radiator, high pressure fuel pipe, main engine, PLC control panel, etc. Piston air compressor parts are mainly concentrated in Wenzhou production, and the supporting facilities are relatively complete. Like Wenzhou Longwan Vacuum Valve Factory, it has a long history. It is a private enterprise specializing in the production of piston air compressors. Since 1987, it has been air compressors. Machine parts are pursuing quality. Enterprises that have been supporting include Wuxi Compressor Co., Ltd., Beijing First General Machinery Factory, Shanghai Dalong, Nanjing Compressor Co., Ltd., Yuyao Huajie Compressor Factory and Liuzhou Compressor. General Plant, Chongqing Air Compressor Factory, Shang Leng, Shen Leng, Cheng Leng, Liuzhou No. 2 Air Compressor Factory, Shenyang Gas Compressor Factory, Shanghai First Compressor Factory, Hefei Kangpu, Taiyuan Gas Compressor Factory, Jiangxi Gas Compressor Factory, Shandong Yantai Air Compressor Factory, Gusu Compressor Factory, Changde Compressor Factory West, An Compressor Factory, Anqing Compressor Factory, Weifang Shengjian, Xuzhou 6414, Guangyi, Fujian Hitachi, Sichuan Air Separation , 邯 oxygen, river oxygen. Hang oxygen. Su oxygen. Harmonic, its main production accessories are pistons. Coolers. Valve seat. Valve cover. Packing components.. Piston ring. Safety valve. Cylinder. Cylinder liner. Cylinder head, etc. Pieces. Screw compressor parts are widely produced. The filter cores are produced in Hebei, Jiangsu, Taizhou, Shanghai, etc. Some of the solenoid valves are in Wenzhou, Jiangsu, Shenzhen, etc. Many of the motors and electronic control boards are imported from Germany, the United Kingdom, and the United States. In the meantime, the screw is looking for a domestic first-class manufacturer in China, and the second-rate brand does not have the strength to purchase equipment for producing screws. Slide type air compressor: The technical requirements of the slide type air compressor are relatively high, so there are not many manufacturers of accessories, mainly the original parts of the air compressor. The sliding vane air compressor works in a relatively simple manner. The most advanced integrated design is adopted in the structural design, and 95% oil and gas pipelines and valves are built in. The accessories of the sliding vane air compressor are: air filter, minimum pressure valve, oil separator, oil filter, temperature control bypass valve, industrial motor, flexible coupling, PLC controller, oil inlet pipe, oil outlet pipe, Drain solenoid valve, intake valve, main engine, oil return valve, etc. There are not many manufacturers of sliding vane air compressors. There are special sliding vane air compressors for electrolytic aluminum plants of Germany NKM-NOELL, and Italian Matai sliding vane air compressors. They are generally the original accessories of the original factory.