The cooling of hydraulic heat exchanger with CW-6300 water chiller

Jacky, a Slovenian customer said in an e-mail: [Hello, I`d like to purchase an S&A CW-5000 water chiller to cool hydraulic heat exchanger (a requirement table was attached)"
Four requirements are written in the table: 1. the cooling capacity of the water chiller shall reach 1KW at a room temperature of 30℃ and outlet water temperature of 15℃; 2. the outlet water temperature of the water chiller shall be in the range of 5℃~25℃; 3. the environment temperature for the water chiller shall be in the range of 15℃~35℃; 4. the voltage shall be 230V and frequency shall be 50Hz.
But, according to the analysis on the performance curve chart of S&A CW-5000 water chiller, under the room temperature of 30℃ and outlet water temperature of 20℃, the cooling capacity can only reach 590W, which can`t meet Jacky`s cooling requirement; but for CW-5300 water chiller with 1800W cooling capacity, its cooling capacity can reach 1561W under the same condition, which can meet Jacky`s cooling requirement.
So, S&A recommended CW-5300 water chiller to Jacky to cool the hydraulic heat exchanger. After S&A told the reason to Jacky, Jacky directly placed an order to purchase the CW-5300 water chiller.
Thank you so much for your support and trust in S&A. All S&A water chillers have passed the certification of ISO, CE, RoHS and REACH, and the warranty period has been extended to 2 years. Our products are worthy of your trust!
The technical parameter of CW-5000: http://Products/ChillerCW5000800Wcoo.html