The final product will be 40%-45% tire oil (fuel oil), carbon black and 35% carbon black, 10% steel and another 5-10% recycled gas (CH4-C4H10).
Lanning Waste Tyres Recycling,Tyres Recycling to Oil Plant,Waste Recycling to Fuel Oil,Waste Tyre Recycling to Fuel Plants Henan Lanning Technology Co., Ltd , https://www.lanningrecycling.com
As more and more homes are warmed up, more and more problems arose. Now Shanghai Fushan Floor Heating Experts will explain them to you.
(1) The experimental pressure shall not be less than 0.3 MPa for static pressure in the system and shall not be less than 0.6 MPa.
(2) Prior to the hydrostatic test, safe and effective fixing and protective measures should be taken for pressure test piping and components.
(3) Water Pressure Test Procedure:
1. Slow water injection by the water separator, while eliminating the gas in the pipeline.
2, water filled with water after the inspection.
3. Use a manual pressure test pump to slowly pressurize. The boost time should not be less than 15 minutes.
4. After boosting up to the specified experimental pressure, stop the pressurization. After one hour of regulation, observe that the pressure drop is not more than 0.02 MPa.
The main process is to pyrolyze the tire into oil and gas by directly heating the reactor;
The condenser or cooling tube will cool the gas to a liquid oil with the aid of circulating water;
Then, the remaining gas that cannot be cooled into liquid oil is recycled to the reactor heating system; after the oil and gas is completely discharged, the reactor is stopped to be cooled, and the reactor below 70 degrees is cooled; then the door can be automatically opened and the carbon black can be discharged. .
The capacity of each batch of products ranges from 5 tons to 20 tons.
LN-2200-6000 capacity 5-6 tons
LN-2200-6600 has a capacity of 7-8 tons
LN-2200-8000 has a capacity of 9-10ton
LN-2600-6600 has a capacity of 10-12ton
LN-2600-8000 has a capacity of 12-14ton
LN-2800-6000 capacity is 10-12ton
LN-2800-6600 has a capacity of 12-14 tons
LN-2800-8000 capacity is 15-20ton
If cut into small pieces, it can handle more.