Product Name: Stainless Steel Sanitary Pneumatic welded Butterfly Valve with Solenoid Valve  Product Name: Stainless Steel Sanitary Pneumatic welded Butterfly Valve with Solenoid Valve Â
Machining is a process that accurate to
remove material by mechanical machining technology.
The main classification:
Step of working out process regulations:
1) Calculating annual
production program, determine the type of manufacture.
2) Analysis part drawing
and the product assembly drawing.
3) Select blank.
4) Formulation process
route.
5) Determine the
machining allowance of each process, calculating the dimension and tolerance.
6) Identify the equipment
used in each process and cutting tool, jig, measuring tools and auxiliary
tools.
7) Determine the cutting
dosage and man-hour quota.
8) Determine the main
process of technical requirements and test methods.
9) Fill in the process
documents.
The production of CNC Machining Part, metal machined parts
High Precision Machining, Machined Part, CNC Machining Part, CNC Machined Part NINGBO BEILUN LEMA MACHINERY TECHNOLOGY CO.,LTD , http://www.china-lema.com
 Stainless Steel Sanitary Pneumatic welded Butterfly ValveÂ
welded Butterfly Valve with Solenoid Valve
Technical Parameters
Standard
3A,SMS,DIN,ISO,RJT,IDF
Product wetted steel parts
AISI304/AISI316L
Provided with material inspection report
Other steel parts
AISI304
Size
1/2"~6",DN10~DN150
Seal material
EPDM/VMQ/FPM
All seals material comply with FDA21CFR117.2600
Working pressure
≤10bar(145psi)
Supply pressure for air actuator
5~8(0~116psi)
Working temperature
EPDM:-14~248ºF(-10~120ºC)
VMQ:-58~356ºF(-50~180ºC) FPM:22~446ºF(-30~230ºC) Other materials are avaible upon request
Sterilization temperature
302ºF(150ºC,max 20min)
Outside surface treatment
Ra16~32uin(o.4~0.8um)
Inside surface treatment
Ra32~64uin(o.8~1.6um)
Connetion ends
butt-weld,clamped ends,male ends, flange ends
Pneumatic head
Normally closed(NC)-Air to open,spring to close
Normally open(NO)-Air to close,spring to open Air to air(AA)-Air to open,air to close
1.The seat and gasket can be NBR (Nitrile), VMQ (Silicone) or Viton (FPM) all complying with FDA 21CFR177.2600.
2. End connection can be butt-welded, sanitary clamp, threaded, flanged, I-line or others upon request.
3.Handle: 3-position pull handle; multi-position handle in either pure stainless steel or with plastic cover.
4.Actuator: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), electric actuator.
5.Control: position sensor, C-top controller, C-top controller (AS-I)
Design Features
1.Various standards can be provided: DIN, 3A, SMS, ISO / IDF, BS / RJT, and ASME / BPE.
2.Available in sizes from DN25 / 1" to DN300 / 12"
3.Multiposition handles can be used for valves up to DN100 / 4";Â
4.Pull handles can be used for valves from DN25 / 1" to DN300 / 12"
Manual handle,Â
5.pneumatic actuator and electric actuator are interchangeable.
6.Seals comply with FDA 21CFR 177. 2600.
7.The valve body can be customized with a wide selection of different connections.
Butterfly valves can be actuated either manually or pneumatically. There is a wide range of manual controls to meetÂ
the different system requirements. Pneumatic controls can be horizontal and vertical, single-, double-effect, and modulating. They can be fitted with control tops and proximity It is widely applied to many fileds,such as
beer,beverage,dairy food,fruit juice,pharmacy,biological etc.
Our Service
On Samples
Buyer bear the air fee, but this fee will be reduced from order directly
On After Sales
Free replacement if there is any quality problem
On Delivery
Never delay delivery timeÂ
On Materials
Ensure material pure
Ensure material pure
Welcome Â
Packing&Shipping information and pictures of  Stainless Steel Sanitary Pneumatic welded Butterfly Valve with Solenoid Valve
Port:Shanghai Port or Ningbo Port,China
MOQ:1 set
Supply ability:1,000 sets/month
Payment terms:T/T,Western Union, Paypal, L/C
Packaging:Shrink wrapped-in seaworthy wooden cased
Delivery time:Depends on quantity
Shipping mode:By sea,by air,by express
1.Sanitary Valves,such as butterfly valves,check valves,diaphragm valves,ball valves,pneumatic reversal valves,ect.
2.Sanitary pipe fittings,such as triclamp ferrule,elbow,tee,reducer,spray valve,sight glass,strainer,ect.
3.Sanitary Pumps,such as Sanitary Centrifugal Pumps,Sanitary Rotary Lobe Pumps
4.Sanitary Manhole Covers,such as square/round/elliptical manhole covers
Sanitary Valves
Sanitary Butterfly Valves
Sanitary Check Valves Sanitary Ball Valves Sanitary Divert Valves Sanitary Diaphragm Valves Sanitary Sample Valves Sanitary Control Valves Sanitary Mixproof Valves
Sanitary Pipe Fittings
Sanitary Elbow
Sanitary Tee Sanitary Reducer Sanitary Cross Sanitary Triclamp Ferrule Sanitary Cap Sanitary Pipe Hanger Sanitary Tank Cleaning Ball Sanitary Hose Joint Sanitary Unions Sanitary Sight Glass Sanitary Strainer
Sanitary Manways
Sanitary Round Manway without Pressure
Sanitary Round Manway with Pressure Sanitary Square Manway Sanitary Oval Manway
Sanitary Pumps
Sanitary Centrifugal Pump
Sanitary Lobe Pump Sanitary Self Priming Pump
Sanitary Tanks
Storage Tank
Fermentation Tank Mixing Tank Warm-keeping Tank
Sanitary TubeÂ
Seamless TubeÂ
Weldless Tube
Sanitary Gasket
Silicone/EPDM Gasket for Triclamp
Silicone/EPDM Gasket for Union Silicone/EPDM Gasket for Butterfly Valve Silicone/EPDM Gasket for Manhole Cover
 Stainless Steel Sanitary Pneumatic welded Butterfly ValveÂ
welded Butterfly Valve with Solenoid Valve
Technical Parameters
Standard
3A,SMS,DIN,ISO,RJT,IDF
Product wetted steel parts
AISI304/AISI316L
Provided with material inspection report
Other steel parts
AISI304
Size
1/2"~6",DN10~DN150
Seal material
EPDM/VMQ/FPM
All seals material comply with FDA21CFR117.2600
Working pressure
≤10bar(145psi)
Supply pressure for air actuator
5~8(0~116psi)
Working temperature
EPDM:-14~248ºF(-10~120ºC)
VMQ:-58~356ºF(-50~180ºC) FPM:22~446ºF(-30~230ºC) Other materials are avaible upon request
Sterilization temperature
302ºF(150ºC,max 20min)
Outside surface treatment
Ra16~32uin(o.4~0.8um)
Inside surface treatment
Ra32~64uin(o.8~1.6um)
Connetion ends
butt-weld,clamped ends,male ends, flange ends
Pneumatic head
Normally closed(NC)-Air to open,spring to close
Normally open(NO)-Air to close,spring to open Air to air(AA)-Air to open,air to close
1.The seat and gasket can be NBR (Nitrile), VMQ (Silicone) or Viton (FPM) all complying with FDA 21CFR177.2600.
2. End connection can be butt-welded, sanitary clamp, threaded, flanged, I-line or others upon request.
3.Handle: 3-position pull handle; multi-position handle in either pure stainless steel or with plastic cover.
4.Actuator: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), electric actuator.
5.Control: position sensor, C-top controller, C-top controller (AS-I)
Design Features
1.Various standards can be provided: DIN, 3A, SMS, ISO / IDF, BS / RJT, and ASME / BPE.
2.Available in sizes from DN25 / 1" to DN300 / 12"
3.Multiposition handles can be used for valves up to DN100 / 4";Â
4.Pull handles can be used for valves from DN25 / 1" to DN300 / 12"
Manual handle,Â
5.pneumatic actuator and electric actuator are interchangeable.
6.Seals comply with FDA 21CFR 177. 2600.
7.The valve body can be customized with a wide selection of different connections.
Butterfly valves can be actuated either manually or pneumatically. There is a wide range of manual controls to meetÂ
the different system requirements. Pneumatic controls can be horizontal and vertical, single-, double-effect, and modulating. They can be fitted with control tops and proximity It is widely applied to many fileds,such as
beer,beverage,dairy food,fruit juice,pharmacy,biological etc.
Our Service
On Samples
Buyer bear the air fee, but this fee will be reduced from order directly
On After Sales
Free replacement if there is any quality problem
On Delivery
Never delay delivery timeÂ
On Materials
Ensure material pure
Ensure material pure
Welcome Â
Packing&Shipping information and pictures of  Stainless Steel Sanitary Pneumatic welded Butterfly Valve with Solenoid Valve
Port:Shanghai Port or Ningbo Port,China
MOQ:1 set
Supply ability:1,000 sets/month
Payment terms:T/T,Western Union, Paypal, L/C
Packaging:Shrink wrapped-in seaworthy wooden cased
Delivery time:Depends on quantity
Shipping mode:By sea,by air,by express
1.Sanitary Valves,such as butterfly valves,check valves,diaphragm valves,ball valves,pneumatic reversal valves,ect.
2.Sanitary pipe fittings,such as triclamp ferrule,elbow,tee,reducer,spray valve,sight glass,strainer,ect.
3.Sanitary Pumps,such as Sanitary Centrifugal Pumps,Sanitary Rotary Lobe Pumps
4.Sanitary Manhole Covers,such as square/round/elliptical manhole covers
Sanitary Valves
Sanitary Butterfly Valves
Sanitary Check Valves Sanitary Ball Valves Sanitary Divert Valves Sanitary Diaphragm Valves Sanitary Sample Valves Sanitary Control Valves Sanitary Mixproof Valves
Sanitary Pipe Fittings
Sanitary Elbow
Sanitary Tee Sanitary Reducer Sanitary Cross Sanitary Triclamp Ferrule Sanitary Cap Sanitary Pipe Hanger Sanitary Tank Cleaning Ball Sanitary Hose Joint Sanitary Unions Sanitary Sight Glass Sanitary Strainer
Sanitary Manways
Sanitary Round Manway without Pressure
Sanitary Round Manway with Pressure Sanitary Square Manway Sanitary Oval Manway
Sanitary Pumps
Sanitary Centrifugal Pump
Sanitary Lobe Pump Sanitary Self Priming Pump
Sanitary Tanks
Storage Tank
Fermentation Tank Mixing Tank Warm-keeping Tank
Sanitary TubeÂ
Seamless TubeÂ
Weldless Tube
Sanitary Gasket
Silicone/EPDM Gasket for Triclamp
Silicone/EPDM Gasket for Union Silicone/EPDM Gasket for Butterfly Valve Silicone/EPDM Gasket for Manhole Cover
Mechanical processing have manual processing
and CNC machining two types. Manual processing is means machining
various materials by mechanical workers manual milling machine, lathe,
drilling machine and the sawing machine and other mechanical
equipment. Manual processing is suitable for small batch production,
simple parts. Numerical control machining (CNC) means the mechanical
workers use numerical control equipment, the CNC equipment including CNC
center, milling center, wire cutting equipment, thread cutting machine,
etc. The vast majority of the machining shop machining the parts by
numerical control machining technology. Through programming,
coordinates the parts in the Cartesian coordinate system (X, Y, Z) into a
programming language, the CNC controller of numerical control machine by
identifying and explain programming language to control the axis of CNC machine
tools, automatic removal of material, get the part according to the requirement
and finish machining. CNC machining in a way that is straight artifacts, suitable for
mass and complex shape parts.
Stainless Steel Sanitary Pneumatic Welded Butterfly Valve with Solenoid Valve
Model NO.: XS-06
Work Pressure: Low Pressure (Pn<1.6mpa)
Working Temperature: Normal Temperature (-40°C<T<120°C)
Material of Seal Surface: Soft Sealed
Valve Body: Forge Welding
Application: Industrial Usage, Water Industrial Usage, Household Usage, Milk,Beer,Juice,Phramacy
Connection Standard: DIN, 3A, SMS, Rjt,ISO,Idf
Flow Medium Parts: 304, 304L, 316L (1.4301, 1.4307, 1.4404)
Port Size: Dn10-150 or 1/2"-150
Way of Connection: Butt-Welded,Tri Clamp,Male and Female Thread
Gasket: EPDM/Vmq/FPM
Working Pressure: 10bar (145psi)
Temperature Range: -20 Degree Celsius to 120 Degree Celsius
Processing Machine: Forge Processing, Advance CNC Machine
Working Principle: Remote-Controlled Operation by The Driving Gear or
Pneumatic Head: Normally Closed,Nornally Open,Air to Air
Trademark: XUSHENG
Transport Package: Shrink Wrap-Carton Case-Exporting Plywood Case
Specification: ISO, 3A, SGS
Origin: Made in China
HS Code: 8481804090
Model NO.: XS-06
Work Pressure: Low Pressure (Pn<1.6mpa)
Working Temperature: Normal Temperature (-40°C<T<120°C)
Material of Seal Surface: Soft Sealed
Valve Body: Forge Welding
Application: Industrial Usage, Water Industrial Usage, Household Usage, Milk,Beer,Juice,Phramacy
Connection Standard: DIN, 3A, SMS, Rjt,ISO,Idf
Flow Medium Parts: 304, 304L, 316L (1.4301, 1.4307, 1.4404)
Port Size: Dn10-150 or 1/2"-150
Way of Connection: Butt-Welded,Tri Clamp,Male and Female Thread
Gasket: EPDM/Vmq/FPM
Working Pressure: 10bar (145psi)
Temperature Range: -20 Degree Celsius to 120 Degree Celsius
Processing Machine: Forge Processing, Advance CNC Machine
Working Principle: Remote-Controlled Operation by The Driving Gear or
Pneumatic Head: Normally Closed,Nornally Open,Air to Air
Trademark: XUSHENG
Transport Package: Shrink Wrap-Carton Case-Exporting Plywood Case
Specification: ISO, 3A, SGS
Origin: Made in China
HS Code: 8481804090