Single Girder Overhead Crane End Carriage 5t End Truck

Model NO.: 5T
Span: 1m-33m
Feature: Overhead Crane End Carriage
Girder Structure: Rigid Box Type
Product Name: Crane End Carriage
Working System: A3-A5
Max. Lifting Height: 6~30m
Wheels: Double Flanged Wheels
Warranty: 1 Year
Application: Construction Usage, Workshop Usage, Container Usage, Mineral Area Usage
Sling Type: Wire Rope
Power Source: Electric
Moving Type: Wheel
Installation: Assembled
Tower Crane Type: Bridge Crane
Trademark: Anlian
Transport Package: Paper Box and Wooden Case
Specification: CCC, ISO9001
Origin: Xinxiang, He′nan, China
HS Code: 8431499900
Model NO.: 5T
Span: 1m-33m
Feature: Overhead Crane End Carriage
Girder Structure: Rigid Box Type
Product Name: Crane End Carriage
Working System: A3-A5
Max. Lifting Height: 6~30m
Wheels: Double Flanged Wheels
Warranty: 1 Year
Application: Construction Usage, Workshop Usage, Container Usage, Mineral Area Usage
Sling Type: Wire Rope
Power Source: Electric
Moving Type: Wheel
Installation: Assembled
Tower Crane Type: Bridge Crane
Trademark: Anlian
Transport Package: Paper Box and Wooden Case
Specification: CCC, ISO9001
Origin: Xinxiang, He′nan, China
HS Code: 8431499900
single girder overhead crane end carriage 5t end truck
Brief Introduction:
End carriage also called end beam or end truck. It is a necessary actuating device to be used for single or double girder bridge crane (overhead crane).
About capacity: Normally from 1T to 10T. For special customer, we manufacture from the minimum capacity to the maximum capacity. How big you need, how big we make for you.
About gear diameter: we have our standard and normal ones for your selection. But we also do custom-made for you especially according to your bridge crane specification.
About motor quality: For meeting different customers demand, we specially manufacture two kinds of motor for our end truck. One is standard conical lifting motor which is manufactured by the most famous China motor factory "Nanjing Special Motor Factory", the other one is the new safety motor "Softer Start motor" which is popular for most of customers nowadays.
About span: As there are various usage environments for the bridge crane, the span would be different .If span is too large, maybe the end truck cannot support such capacity. How to find a solution? We will do custom made overall considering your capacity and span or other specification.
About travelling speed: normally over 17m/min. Different motor, different speed.


Just as a good car gives your years of trouble free service, our end carriages will transport your overhead cranes in a manner that maximizes crane life and minimizes the cost of operation and maintenance.
We custom design our end trucks to meet your specific needs:
-the steel structure is a torsion resistant box girder prepared to be connected to the crane girder.
-Rigid special end carriage-girder connections and forged wheel design ensure years of low maintenance operation.
-Quick disconnection electrical plugs and a power lock wheel assembly providing a easy inspection and service.
-High grade rubber bumpers are bolted on for energy absorbing, allowing easy removal for replacement or maintenance
- Three stage motor-gearboxes, travel wheels with double flanged with mounted bearings, drive to the wheels is direct via splined shaft.
Structure &  Technical Data:



Technical Data:
 
Model Crane specification End carriage size (W*H*Thickness*L) Width of the connecting plate Wheel dia*Wheel race width Motor power
L120-20 1t/5.5m-11.5m 150*150*6*2000 500mm 120*60 0.3kw
L120-25 1t/12m-16.5m 150*150*6*2500 500mm 120*64 0.3kw
L160-20 2t3t/5.5m-11.5m 150*250*6*2000 500mm 174*64 0.3kw
L160-25 2t3t/12m-16.5m 150*250*6*2500 550mm 174*64 0.4kw
L160-30 2t3t/17m-22.5m 150*250*6*3000 600mm 174*64 0.4kw
L200-20 5t/5.5m-11.5m 150*250*6*2000 600mm 198*64 0.4kw
L200-25 5t/12m-16.5m 200*250*6*2500 600mm 198*64 0.4kw
L200-30 5t/17m-22.5m 200*250*6*3000 650mm 198*64 0.75kw
L240-20 10t/5.5m-11.5m 200*250*6*2000 650mm 240*70 0.75kw
L240-25 10t/12m-16.5m 200*300*6*2500 650mm 240*70 0.75kw
L240-30 10t/17m-22.5m 200*300*6*3000 650mm 240*70 1.0kw
L240-35 5t/23m-28.5m 200*300*6*3500 650mm 200*64 0.75kw
L268-25PA 16t/5.5m-16.5m 200*300*8*2500 700mm 268*90 1.1kw
L268-30PA 16t/17m-22.5m 200*300*8*3000 750mm 268*90 1.1kw
L268-35 10t/23m-28.5m 200*300*8*3500 700mm 240*70 1.1kw
L268-25PB 20t/5.5m-16.5m 200*350*8*2500 900mm 268*90 1.5kw
L268-30PB 20t/17m-22.5m 200*350*8*3000 950mm 268*90 1.5kw

Packaging & Shipping:



Not only the End Carriage of crane, but the other spare parts of cranes, we can also provide to you. If you need my help, just contact to me.


Any inquiry, please feel free to contact us!

Contact Information:
 
Amy Guo
Xinxiang Anlian Crane Construction Machinery Co., Ltd.
Add: Industrial Zone, Weizhuang Hanliao District, Changyuan County, 
        Xinxiang City, Henan Province, China.
M: 0086-15893228602
T: 0086-15346314998
F: 0086-0373-8928928
   
W: http://alqz.en.alibaba.com
single girder overhead crane end carriage 5t end truck
Brief Introduction:
End carriage also called end beam or end truck. It is a necessary actuating device to be used for single or double girder bridge crane (overhead crane).
About capacity: Normally from 1T to 10T. For special customer, we manufacture from the minimum capacity to the maximum capacity. How big you need, how big we make for you.
About gear diameter: we have our standard and normal ones for your selection. But we also do custom-made for you especially according to your bridge crane specification.
About motor quality: For meeting different customers demand, we specially manufacture two kinds of motor for our end truck. One is standard conical lifting motor which is manufactured by the most famous China motor factory "Nanjing Special Motor Factory", the other one is the new safety motor "Softer Start motor" which is popular for most of customers nowadays.
About span: As there are various usage environments for the bridge crane, the span would be different .If span is too large, maybe the end truck cannot support such capacity. How to find a solution? We will do custom made overall considering your capacity and span or other specification.
About travelling speed: normally over 17m/min. Different motor, different speed.


Just as a good car gives your years of trouble free service, our end carriages will transport your overhead cranes in a manner that maximizes crane life and minimizes the cost of operation and maintenance.
We custom design our end trucks to meet your specific needs:
-the steel structure is a torsion resistant box girder prepared to be connected to the crane girder.
-Rigid special end carriage-girder connections and forged wheel design ensure years of low maintenance operation.
-Quick disconnection electrical plugs and a power lock wheel assembly providing a easy inspection and service.
-High grade rubber bumpers are bolted on for energy absorbing, allowing easy removal for replacement or maintenance
- Three stage motor-gearboxes, travel wheels with double flanged with mounted bearings, drive to the wheels is direct via splined shaft.
Structure &  Technical Data:



Technical Data:
 
Model Crane specification End carriage size (W*H*Thickness*L) Width of the connecting plate Wheel dia*Wheel race width Motor power
L120-20 1t/5.5m-11.5m 150*150*6*2000 500mm 120*60 0.3kw
L120-25 1t/12m-16.5m 150*150*6*2500 500mm 120*64 0.3kw
L160-20 2t3t/5.5m-11.5m 150*250*6*2000 500mm 174*64 0.3kw
L160-25 2t3t/12m-16.5m 150*250*6*2500 550mm 174*64 0.4kw
L160-30 2t3t/17m-22.5m 150*250*6*3000 600mm 174*64 0.4kw
L200-20 5t/5.5m-11.5m 150*250*6*2000 600mm 198*64 0.4kw
L200-25 5t/12m-16.5m 200*250*6*2500 600mm 198*64 0.4kw
L200-30 5t/17m-22.5m 200*250*6*3000 650mm 198*64 0.75kw
L240-20 10t/5.5m-11.5m 200*250*6*2000 650mm 240*70 0.75kw
L240-25 10t/12m-16.5m 200*300*6*2500 650mm 240*70 0.75kw
L240-30 10t/17m-22.5m 200*300*6*3000 650mm 240*70 1.0kw
L240-35 5t/23m-28.5m 200*300*6*3500 650mm 200*64 0.75kw
L268-25PA 16t/5.5m-16.5m 200*300*8*2500 700mm 268*90 1.1kw
L268-30PA 16t/17m-22.5m 200*300*8*3000 750mm 268*90 1.1kw
L268-35 10t/23m-28.5m 200*300*8*3500 700mm 240*70 1.1kw
L268-25PB 20t/5.5m-16.5m 200*350*8*2500 900mm 268*90 1.5kw
L268-30PB 20t/17m-22.5m 200*350*8*3000 950mm 268*90 1.5kw

Packaging & Shipping:



Not only the End Carriage of crane, but the other spare parts of cranes, we can also provide to you. If you need my help, just contact to me.


Any inquiry, please feel free to contact us!

Contact Information:
 
Amy Guo
Xinxiang Anlian Crane Construction Machinery Co., Ltd.
Add: Industrial Zone, Weizhuang Hanliao District, Changyuan County, 
        Xinxiang City, Henan Province, China.
M: 0086-15893228602
T: 0086-15346314998
F: 0086-0373-8928928
   
W: http://alqz.en.alibaba.com

Specifications

1)Suitable for conveyance of gas, petroleum, fluid, and electricity
2)Seamless,SAW or ERW alloy Steel Pipe
THK <3"; OD <120"

A: Alloy Pipe and tube Size Range:
1) Round pipe diameter: 4mm-3000mm, thickness: 0.3-60.0mm
2) Square tube: 8 x 8mm-1000 x 1000mm, thickness: 0.4-60.0mm
3) Rectangle tube: 8x 10mm-800 x 500mm, thickness: 0.4-60.0mm
B: Surface finish: black, blank, bright and galvanized, or painted
C: Length of each pipe: 500mm-16,000mm
D: Steel grade: 10#, 20#, A106B, A53B, Q195 Q235, Q345, ST37-2, ST52, S235, S355, SS400, A1010, SAE1045, X40, X60, A312, 304, 316 etc
E: Conforms to international standards, like: ASTM A53, ASTM A500, ASTM A513, ASTM A312, BS1387, DIN2391, DIN2394, DIN17175, JIS G3452, EN10210, EN10219, EN10025, EN10305 etc

Steel Pipe

ERW Steel Pipe, Square Steel Pipe, LSAW Steel Pipe, SSAW Steel Pipe

Cangzhou Weiheng Pipe Industry Co.,Ltd , http://www.czweiheng.com