Motorcycles Gear Hobbing Machine Motorcycles Gear Hobbing Machine,Helical Gear Hobbing Machine,Helical Gear Cutting Machine,Gear Hobbing Shaper Machine Zhejiang Toman Intelligent Technology Co., Ltd , https://www.tomanmachines.com
Electric Multi-Turn Actuator
Electric Multi-Turn Actuator
Model NO.: CKD10
Trademark: Yangzhou Hengchun
Transport Package: Wooden Case
Specification: CE, ISO, ATEX, API, SIL2
Origin: China
HS Code: 9032
Torque range: 100 to 3000 N·m
Yangzhou Hengchun was established in 1994, with a registered capital of $10 million and total assets of $25 million. The company specializes in manufacturing intelligent actuators of the CKD series, suitable for use in oil and gas companies, power plants, metallurgy, chemical industries, and water treatment systems. Our products are known for their high quality and reliability, and we are proud to be one of the top manufacturers in China.
In the oil and gas industry, our actuators have been successfully applied in over 300 projects with major clients such as PetroChina, Sinopec, Sinochem, and CNOOC. In the power generation sector, we are a key supplier to the top five power plants across more than 200 projects. We understand the importance of quality and customer satisfaction, which is why we focus on delivering reliable, long-lasting, and efficient solutions.
Technical Parameters:
Working Environment:
- Temperature: -30°C to +70°C (customizable to -45°C to +85°C)
- Relative Humidity: 95% at 25°C
- Pressure: 86 kPa to 106 kPa
Power Supply:
- Single Phase: 220V, 50Hz; Three Phase: 380V, 50Hz
- Voltage Tolerance: ±10% for three-phase, -15% to +10% for single-phase
- Frequency Tolerance: ±5%, Harmonic Content <5%, DC Tolerance ±10%
Insulation Resistance:
- Between input terminal and case: >20 MΩ
- Between input terminal and power supply terminal: >50 MΩ
- Between power supply terminal and case: >50 MΩ
Motor Insulation Level:
- Level F (Level H available upon request)
Protection Level:
- IP68 (waterproof up to 20 meters for 96 hours)
Explosion Protection Level:
- EXD IIBT4 / EXD II CT4
On-Off Type:
- Start Frequency: 650 times per hour
- Designed Lifetime: Minimum maintenance-free time of 30,000 cycles
- Working Mode: Short-time working type, rated run time of 15 minutes (customizable to 30 minutes)
Regulated Type:
- Start Frequency: 1200 times per hour
- Designed Lifetime: No less than [X] cycles (to be specified)
- Working Mode: Intermittent periodic type, minimum rated load sustained rate of 25%
Basic Parameters:
- Basic Error: ≤ ±0.1%
- Hysteresis: ≤ 0.5%
- Dead Zone: 0.1% to 9.9% (continuously adjustable)
- Damping Characteristic: Undamped
Input and Output Signals:
- Analog Input: 4–20 mA DC, input impedance ≤ 250 Ω
- Analog Output: 4–20 mA DC, load resistance ≥ 750 Ω
- Linear Error: ≤ 0.5%
- Supply Voltage: 24 VDC provided internally
- Built-in Servo Amplifier
- Optoelectronic Isolation for Input/Output Channels
- Passive Junction Capacity: 250V/5A AC; 30V/5A DC
At Yangzhou Hengchun, we continuously strive to improve our products and services, ensuring that every actuator meets the highest standards of performance and safety. We believe that customer satisfaction is our top priority, and we are committed to providing innovative, reliable, and durable solutions for industrial applications worldwide.