Haze governance can not be separated from the joint efforts of all parties, but also need technical support. During the two sessions this year, the premier emphasized in his government work report that it is necessary to constantly speed up technological innovation, strive to overcome the mechanism of haze formation and find out the reasons for the haze. Recently, good news came again in the field of haze management technology. The "Rankin vortex micro-wet electric deduster mist eliminator" adopting the latest domestic flue gas dust removal technology is available in Zhengzhou. It is understood that this is the current cost of the lowest cost and the highest dust removal efficiency of the new dust removal equipment. Domestic latest dust removal technology and equipment debut in Zhengzhou March 10, the industry experts as "the current cost of construction, the lowest operating costs and the highest efficiency of dust removal," the new dust removal equipment, "Lanjin eddy micro-wet dust remover" technology evaluation and press conference held in Zhengzhou . On the same day, a review group consisting of 2 academicians and 6 domestic famous experts evaluated the technical equipment. Qu Dongsheng, director of the Industrial Development Department of China Hi-tech Industrialization Research Institute, announced at the conference that: Rankine eddy micro-wet electrostatic dust removal Fog technology and equipment for the depth of flue gas dust removal technology leading international level. According to reports, the current equipment, including the city of Shenyang, including the successful trial run. Practice has proved: The technical equipment when the flue gas inlet dust concentration ≤ 50mg / Nm3, after the device treatment of dust concentration of flue gas emissions <5mg / Nm3; when the flue gas inlet dust concentration ≤ 100mg / Nm3, Dust concentration of flue gas discharged after equipment treatment <10mg / Nm3. Energy-saving emission reduction is an important means to solve the haze problem, and flue gas dust removal is an important part of energy-saving emission reduction. Cheng Zhi Zhang, deputy general manager of Tan Yang Thermal Power Co., Ltd., participating in the trial operation of this project, said that the investment and operation cost of new equipment were 25% and 10% respectively compared with the wet electrostatic precipitators being used on the market, The effect is better. Especially for the flue gas concentration of 100mg / Nm3 or more with large inlet flue gas concentration, the dust removal efficiency of more than 90% can also be achieved, and the dust emission concentration is less than 10mg / Nm3. "Rankin eddy micro-wet electric deduster demister" patented technology inventor Peng introduced Hill, "This is the latest domestic flue gas dust removal technology." The successful development of technology and equipment, marking the depth of flue gas removal technology and equipment changes, Will replace those with high investment, high energy consumption of deep dedusting equipment, and will promptly promote the Ministry of Environmental Protection's "ultra-low emissions" plan to quickly promote the management of haze. Ma Fu Li, president of Henan Environmental Protection Industry Association, said the technical equipment has the advantages of low investment, low running cost and high efficiency dust removal. After the promotion and application, it will promote the ultra-low emission of soot in our province and the whole country, improve the air quality and quickly solve the haze Pollution is of great significance. Tower Crane Telescoping Hydraulic System
Tower Crane telescoping hydraulic system is the important system used for tower crane Mast Section telescoping. It includes the telescoping cage, telescoping yoke, cylinder, and Hydraulic Pump Station.
The main components of hydraulic system of tower crane are hydraulic cylinder, control element, oil pipe and pipe joint, oil tank and hydraulic oil filter, etc. Hydraulic Pump Station,Telescoping Cage,Telescoping Yoke,Tower Crane Cylinder,Axial Plunger Pump SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sczenghui.com
The hydraulic pump and the hydraulic motor are the most complex parts of the hydraulic system.
The hydraulic pump inhales the oil and transpotrs it through pipes to the hydraulic cylinder or the hydraulic motor, so that the cylinder or the motor can operate normally.