1~5L HDPE Plastic Container Blow Moulding Machine (ABLB65/75)

December 30, 2020

Model NO.: ABLB65II ABLB75II
Trademark: Apollo
Transport Package: Film Packing
Specification: CE, ISO9001, SGS
Origin: Jiangsu
HS Code: 8477300000
 1~5L HDPE  Plastic Container Blow Moulding Machine
1~5L HDPE Plastic Container Blow Moulding Machine (ABLB65/75)
Plastic blow moulding machine:


ABLB75II full automatic blow molding machine produce bottles from 2L to 7.5L. It is suitable for PP, PE, HDPE, PET, ABS, PVC and so on. Precision design of heater ensures even heating for getting perfect plastic products. Double station design is suitable for mass production to meet your production request in big quantity.

Main technical parameters:

Features: (ABLB75II)
Max. Product volume: 7.5 liters
Dry cycle: 800X2PC/h
Screw diameter: 75mm
Screw L/D ratio: 24 L/D
Screw drive power: 22 KW
Screw heating capacity: 7 KW
No. Of heating zone: 3/4 zones
Output of HDPE: 100 KG/H

Oil Pump drive power: 7.5-11 KW
Clamping force: 78 KN
Max. Size of mold: 148-568mm
Mold stroke: 400X450mm
Max. Die diameter: 160mm

Blow pressure: 0.6mpa
Air volume: 0.8M³ /MIN
Cooling water pressure: 0.3mpa
Water consumption: 80 L/MIN.

 

The electric scooter works on batteries. These are rechargeable batteries and are either of the lead or the Lithium types. The endurance of these batteries is good enough for you to travel within a range of 10 to 40 miles.

  1. The motor of the electric scooter is mounted on the frame.
  2. The electricity that is produced in the battery is transmitted back to the motor through a network of wires.
  3. Depending on the type and model of the scooter, the motor might either make the front wheel or both the wheels to rotate to push the scooter forward.
  4. However, because of the constraints of the motor, electric scooters seldom cross 25 to 30 kmph.




Sea Scooter

Sea Scooter,Aluminum Sea Scooter,Aluminum Mold Sea Scooter,Aluminum Die Casting Sea Scooter

Ningbo Jinyao Machinery Company. LTD , https://www.cardiecastingmold.com