YAG Laser Marking Machine (XZ50)

APPLICATIONS
1)It is suitable for marking kinds of metal and non-metal materials..
2)The machine can not only cut on large format fabric but also on rolls of textile fabric with the automatic 3)feeding device.
4)Garment, leather, stuffed toy, computerized embroidery and clipping industry.
5)Engraving or cutting: Wood, paper, leather, fabric, organic glass, epoxy resin, acrylic, woolen, plastic., Rubber, Ceramic tile, crystal, Stone, bamboo products and other non-metal materials

STANDARD CONFIGURATION
1)50W/75W/100W
2)Software: EZCAD.
3)Water cooling.

OPTIONS
Working area: 100x100mm/200x200mm

SAMPLES




TECHNIICAL PARAMETERS

ER70S-6 Welding Wire

Description: ER70S-6 Welding wire is a low alloy steel gas shielded welding wire, protected with pure Co2 or Ar+CO2 gas. Stable arc, low spatters, excellent fabrication weldability and lowsensitivity of weld gas porosity can be obtained during welding. It is suitable for all position welding especially with large welding current rang. It can show very good welding performance.

Applications:

Suitable for single-pass and multi-pass welding for structures fabricated by carbon steel and 500MPa grade low alloy steel, such as vehicles, bridges, construction and mechanical structures etc.

Instructions:

A. Suitable for using shielding gas at the speed of 20-25 liters per minute.

B. Windshield must be set up in the welding zone, due to gas porosity may be caused be strong wind.

C. Wind extention should be 10-20mm if the current range is under 300A and if above 300A,20-25mm.

Aws E70S-6 Welding Wire

Aws E70S-6 Welding Wire,70S-6 Welding Wire,Rutile Welding Rod,2.5Mm Welding Rod

Dingzhou Jinlong Metal Production Co., Ltd. , http://www.weldingelectrodefactory.com