Brass has excellent Cnc Machining Turning performance, high-speed machining turning under the brass can get excellent surface finish. Our technical team has very good experience in Machining Brass, machining brass including brass plate, brass rod, brass tube. Brass hardware parts has high strength, good plasticity in hot state, good plasticity in cold state, good machinability, easy welding and good corrosion resistance. Brass parts are very durable. It is electrically conductive and does not usually corrode or deteriorate over time. Thus brass is often used to produce products with longer service life. Machining brass parts Widely used: pipes, radiators, ship parts.
Machining Brass Machining Brass, Brass Machined Parts, Perfessional Brass Parts Machining, Machining Brass Conponents, Brass Parts Machining Buildre Group Co., Ltd. , http://www.bldcncmachining.com
The equipment is made up of motor, water pump, roller, support, supporting wheel, scrubbing brush, spray water tube, hopper, cover plate, water tank, valve, transmission shaft, motor rack and electric control switches, etc. Through the chain, the motor sprocket wheel drives the sprocket wheel on the long shaft, and then through the engagement of the sprocket wheel of transition shaft and the stainless steel chain of the roller, the roller starts to rotate. After entering into the roller, the materials will be washed by the spraying tube and scrubbed by the scrubbing brush so as to realize the cleaning effect. There are two water tanks at the bottom of the roller. The tank near to the material inlet side is clear water tank, which connects with clear water through the water inlet pipe. The tank near to the material outlet side is circulating water tank, which contains the water coming from the roller after it washes the materials, and the water can be reused after being filtered by the filter screen in the water tank. Applicable to cleaning of earth vegetables.
Â
Item
Description
Dimension
Capacity
Motor
LHM-2
The material used is
SUS304 stainless steel,
Speed is adjustable,
With water
Spraying TMÂ device
3000*1200*1850
<=2T/H
3.3
LHMÂ -5
4000*1400*2000
3-5T/H
3.3
LHMÂ -10
5000*1600*2500
6-10T/H
5.2
LHMÂ -15
6000*1900*2800
11-15T/H
6
LHMÂ -20
7200*1900*2800
16-20T/H
7.4
Stainless Steel Roller Type Cleaner
The equipment is made up of motor, water pump, roller, support, supporting wheel, scrubbing brush, spray water tube, hopper, cover plate, water tank, valve, transmission shaft, motor rack and electric control switches, etc. Through the chain, the motor sprocket wheel drives the sprocket wheel on the long shaft, and then through the engagement of the sprocket wheel of transition shaft and the stainless steel chain of the roller, the roller starts to rotate. After entering into the roller, the materials will be washed by the spraying tube and scrubbed by the scrubbing brush so as to realize the cleaning effect. There are two water tanks at the bottom of the roller. The tank near to the material inlet side is clear water tank, which connects with clear water through the water inlet pipe. The tank near to the material outlet side is circulating water tank, which contains the water coming from the roller after it washes the materials, and the water can be reused after being filtered by the filter screen in the water tank. Applicable to cleaning of earth vegetables.
Â
Item
Description
Dimension
Capacity
Motor
LHM-2
The material used is
SUS304 stainless steel,
Speed is adjustable,
With water
Spraying TMÂ device
3000*1200*1850
<=2T/H
3.3
LHMÂ -5
4000*1400*2000
3-5T/H
3.3
LHMÂ -10
5000*1600*2500
6-10T/H
5.2
LHMÂ -15
6000*1900*2800
11-15T/H
6
LHMÂ -20
7200*1900*2800
16-20T/H
7.4
Stainless Steel Roller Type Cleaner for Earth Vegetable
Model NO.: LHM
Trademark: Lihong
Specification: 2-20T/H
Origin: China
HS Code: 84342000
Model NO.: LHM
Trademark: Lihong
Specification: 2-20T/H
Origin: China
HS Code: 84342000
Stainless Steel Roller Type Cleaner