KHX-KS65UF2x4-500ml
Technical Data for Blow Molding  KHX-KS65UF2x4-1000ml
1. General Issues
Machine operating manual including Hydraulic, Pneumatic, Assembly drawing, Cooling water.
Max. volume of product: single cavity 500mL
Total weight 12 ton 3.5-4.5bars
Max. output 600pcs/h (250mL product net weight 30-50g,Sufficient cooling water temperature at
8ºC with an intake pressure of between 3.5 to 4.5 bars, with a Min. difference between intake and outlet of 3 bars. )
2. Clamping Unit
Principle: bi-direction synchronous clamping device with double axis.
Linear roller guidance horizontal.
Clamping force: 150KN
Mold platens H x W 400 x 500 mm
Distance between the p;atens: 150-550mm
Clamping unit stroke: 300mm
3. Die Head
Type of die head: Double lays head of accumulator.
Max mouth diameter: 8- 30MM
Max. Storage volume:
Type of temperature sensors: K
Heater power: 15KW
100 point WPS systerm controller (B&R) or  MOOG 100 poing
4. Extruder System
Extruder Screw Barre should be adequate to work with HDPE
Screw diameter: 65-75/30D
Nitride treatment barrel and screw.
Plasticizing efficiency: 80-100 kg/h (HDPE)
Feeding zone grooved with cooling water
Cast-aluminium heater, adopt European mode of connection
Type of temperature sensors:
DC motor drive: 15KW
Cooling by 5 cooling fans.
Raw material hopper with a window.
5.Blow System
Blow Mold system mounted on linear guide under the mold.
Height adjustment mechainsm 150 mm
Blow pin up/down stroke: 150 mm , controlled by hydraulic cylinder
Parison closed
Mechanical adjustment for left and right
6. Take out system
Take out stroke 400 mm
Adopt lear guide and synchronous belt transmission of Servo Driver Motor to advance and retreat
Gripper with the function: auto cooling water
7. Hydraulic System
Hydraulic working pressure 100 -150 bar
Hydraulic system servo pump : 80 L/min
Hydraulic valves:Yuken brand
Oil Temperature sensor showing the screen
Motor power: 7.5-15 KW
Servo system
Servo valve: (REXROTH--From Germany)
Servo oil source:4KW
Piston pump:YUken (YUKEN--From Japan)
Threads of hydraulic block use of screw joint GE(ISO 1179)
8. Pneumatic System
Pneumatic cylinders AIRTEC
Pneumatic valves AIRTEC
Max. pressure of all components: 10 bar
Max. pressure of gauge: 6-8bar
9.Control System
Control System:Moog
Servo WDS control system:
Moog 100point.
Full color 12.4"
Full color 12.4" screen.
Recipe and machine data storage on memory stick (CF)
Emergency stop push buttons (rotationally release) without key
All electric components needs to be for power supply 220V/380V, 50Hz, controller DC24V,
Total rated power: 76 KW
Average energy consumption: 22-30 KW
Main components (Air switch, Contactor) :Schneider intermediate relay: Schneider
Invertot of extuder motor: PARK
Linear transducer: Gefran
Proximity switch: Schneider
Water Cooling Chiller
All pipes for cooling water made of rubber material.
Separate cooling water circuit for Mold, Blow pin, Extruder feeding zone, Oil cooling.
Water consumptions: 10m3/h
11.Machine frame
Clamping unit should be forward: 600 mm, for mold changing
Aluminum profiles for safety doors, with plastic window.
Machine color: according requirement of customer
Overall dimensions of machine LxWxH: 2.8 x 3.2x 3.0 m
Pet Preform Blow Molding Machine
Certification: ISO, CE
Warranty: 12 Months
Customized: Customized
Condition: New
Trademark: Casion
Transport Package: Wooden Box
Specification: 220L
Origin: China
HS Code: 8480719090