PA66 Heat Insulation Strips Extrusion Machine Mold

Huachuang mould can meet the needs of the market and customer.
Huachuang has its own design and development of nylon insulation strip automatic extrusion production line with high stability, high yield, high adaptability.



The utility model mainly uses the special screw to make the polyamide and the glass fiber mixed good. 
Heat insulating rubber strips are widely applied to the doors, windows and curtain wall aluminum sheets through the different sections of the die.

PA66 granules and fiber glass are dired and get into the barrel through the hopper. Screw and pellets contact with the rotation of the screw is forced to promote the spiral groove die direction.
Because the screw barrel gap is small, the granule material is hot body under great pressure in the forward process, it is plasticizied to nylon thermosol through the high temperature of the electric heating ring body. Nylon plastic and plastic compression heating hot melt by extrusion molding, after traction, cutting or rolling become adiabatic adhesive tape products.


The host adopts imported inverter and traction, speed stability, ensure the main, auxiliary synchronous speed.
We use German technology to make the mould, so the surface of thermal insulation strips are beautiful, accurate shape and with high strength.
We use imported Japanese RKC temperature control table, so that the accuracy of the temperature can be controled in ±2 degrees.

1. Our engineers follow the molds' production every week to make sure all of them are in schedule  
2. After trial production, we will check the samples to make sure everything are right 3. We will send the sample and dimension report to our clients for approval
4. After everything is ok, we will do final inspection on the molds and products before shipment. 


Shape: We can make the shape according to customers' requirements.
Package: Plywood case package

A hoist is a device used for lifting or lowering a load by means of a drum or lift-wheel around which rope or Chain wraps. It may be manually operated, electrically or pneumatically driven and may use chain, fiber or Wire Rope as its lifting medium.

The basic hoist has two important characteristics to define it: Lifting medium and power type. The lifting medium is either wire rope, wrapped around a drum, or load-chain, raised by a pulley with a special profile to engage the chain. The power can be provided by different means. Common means are hydraulics, electrical and air driven motors. Both the wire rope hoist and chain hoist have been in common use since the 1800s, however mass production of an Electric Hoist did not start until the early 1900s and was first adapted by Germany. A hoist can be built as one integral-package unit, designed for cost-effective purchasing and moderate use, or it can be built as a built-up custom unit, designed for durability and performance. The built-up hoist will be much more expensive, but will also be easier to repair and more durable. Package units were once regarded as being designed for light to moderate usage, but since the 60s this has changed. Built-up units are designed for heavy to severe service, but over the years that market has decreased in size since the advent of the more durable packaged hoist. A machine shop or fabricating shop will use an integral-package hoist, while a Steel Mill or NASA would use a built-up unit to meet durability, performance, and repairability requirements. NASA has also seen a change in the use of package hoists. The NASA Astronaut training pool, for example, utilizes cranes with packaged hoists.

Hoisting Mechanism

Hoist/Hoisting Mechanism,Hoisting Mechanisms,Hoist Mechanism,Hoist Motor

Eurocrane (China) Co., Ltd. , https://www.eurocranegroup.com