Product Introduction Baghouses (also called pulse jet baghouse, pulsejet dust collectors, etc.) are self-contained, fully automated where needed. We also supply and install ducting, access platforms, ventilation, and instrumentation. Baghouses are engineered for dusts of 3 microns and larger, in the following applications:  We offer a full range of collector designs and media choices to solve the toughest pollution control problems involving high temperatures, pressures, and corrosives. Capacities up to 200,000+ CFM.  Rugged construction is standard.  All-welded fabrication for operation to ±20" WG (rectangular models); 11 gauge, 12 vertical wire cages are standard. Top and side bag models are available. Feature  1. It has modern design, it uses lower gas inlet structure, the rough high temperature granules directly drop to the dust hopper and effectively protects the filter bag. 2. It uses long filter bags and it has smaller floor area in case of equal processing capacity, therefore it is more convenient for reconstruction of old factories. 3. It uses separate chamber offline dust clearing with high efficiency and few secondary flour dust attachment, in the meantime, it can effectively reduce the equipment energy consumption, the fatigue level of filter bag and pulse valve is correspondingly reduced and the service life of filter bag and vane is prolonged by several times and equipment operation cost is remarkably reduced. 4. The overhaul and bag replacement can be carried out for separate chambers under the condition that system blower and system run normally. 5. The filter bag inlet used spring tension structure, it is convenient to disassemble & assemble and it has good tightness. 6. The case uses airtightness design and it carries out leak detecting with oil and reduces air leak to the maximum extent. 7. The whole set of equipment is controlled by PLC to realize automatic dust cleaning, dust removal, automatic temperature control and over temperature alarm.  Model PPC128-6 PPC128-9 PPC128-10 PPC128-2×6 PPC128-2×7 PPC128-2×8 Volume(m³/h) 67300 100900 112100 134600 157000 179400 Air speed(m/min) 1.2-2.0(Speed varies at different dust points) Filtration area(m2) 935 1402 1558 1869 2181 2492 Net filtration area(m2) 779 1246 1402 1713 2025 2336 No. of bag(pc) 768 1152 1280 1536 1792 2084 Resistance(Pa) 1470-1770 Minus pressure(Pa) 7000 Dust content at inlet(g/m³) <1300 Dust emission(g/m³) ≤0.1 Compressed air Pressure(Pa) (5-7)×105  Air consumption 3.6 5.4 6 7 8.3 9.5  (m³/min) Pulse valve Qty(pc) 12 18 20 24 28 32 Size 2-1/2″ Elevation valve Qty(pc) 6 9 10 12 14 16 Size(mm) Valve Φ725,air tank Φ100 Discharge device YJD-26 Outlet 300×300mm Capacity 24m³/h Double flap valve 305×915 Screw conveyor Model Dia. Φ300,capacity 21m³/h N/A Gearbox XWD2.2-5-1/43,power 2.2Kw N/A Air slide Air slide 250mm,flow rate 2.0m³/m2, Pressure 6860pa,If the dust content exceeds 700g/m³ at inlet, bag filter with big screw conveyor should be considered. Bag size and material Dia.×lengthΦ130×3050,Gross weight of polyethylene felt 450g/m2,temperature 120°C Insulation area(m2) 125 196 205 223 247 262 Total weight(approx.)(Kg) 24120 31680 34680 43920 52680 60000 Note 1: Net filtration area means the area of one chamber during dust removing.      2: The compressed air consumption is based on supply of compressed air pipe from an air compression station. The consumption should be considered to be 1.3 times more if the supply is provided by an independent air compressor.  Model PPC128-2×9 PPC128-2×10 PPC128-2×11 PPC128-2×12 PPC128-2×13 PPC128-2×14 Volume(m³/h) 201900
We have different Silicone Fluid, silicone oil for different industries.
dimethyl silicone oil: lubrication, shakeproof, electric insulating oil, defoamer,mould release, cosmetics.rubber and plastic, heat-conducting medium etc.
vinyl silicone oil: silicone rubber compound
hydroxy silicone oil: aids for silicone rubber, waterproof,softner and antiadhesive agent for fabric,paper and leather
amino silicone oil: fabric(terylene/polyester)softer treatment, Fabric; textile, Cosmetics, improve hair combed ,Slippery and shining .
phenyl silicone oil: Insulation, lubrication, damping, quakeproof, moistureproof, dustproof, high temperature hydraulic fluid, High temperature heat carrier, filling oil for Transformer and pressure signals transferring medium for various pressure transmitter.
hydrogen silicone oil: aids for silicone rubber, waterproof,softner and antiadhesive agent for fabric,paper and leather.
Polyether Silicone Oil: silicone surfactant, textile adjuvant,etc
The role of silicone in rubber, plastic and metal demoulding Silicon Fluid, silicon oil, dimethyl silicone oil, vinyl silicone oil, hydroxy silicone oil, amino silicone oil, phenyl silicone oil, hydrogen silicone oil, Polyether Silicone Oil Changzhou Dahua-Luckypower , https://www.czluckypowertech.com
Dust Collector's parameter:
Â
Â
Because of the non-stick property of dimethyl silicone oil and rubber, plastic, metal, etc., it can be used for the demoulding of polyurethane microporous elastomer molded products, but also can be used for the demoulding of peeling polyurethane molded products, rubber products, ABS molded products, etc. The main advantages of the release agent are small release force, no pollution, convenient transportation, and make the surface of the product clean, smooth, clear texture. With the rapid development of polyurethane industry, silicone oil release agent market is expanding.
Energy Saving Lime Plant Dust Collector
Model NO.: ZK
Experience: More Than 50 Years
Factory Area: 55000m2
Installation: Under Our Engineer's Guide
After Sale Service: for The Whole Using Life
Trademark: ZK
Transport Package: Standard Export Packing
Specification: ISO9001, ISO14000, CE
Origin: Zhengzhou, China
Model NO.: ZK
Experience: More Than 50 Years
Factory Area: 55000m2
Installation: Under Our Engineer's Guide
After Sale Service: for The Whole Using Life
Trademark: ZK
Transport Package: Standard Export Packing
Specification: ISO9001, ISO14000, CE
Origin: Zhengzhou, China
Energy Saving Lime Plant Dust Collector