The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
PVC Edge Banding For Office,Pvc Edge Banding For Office,Pvc Edge Banding For Office Table,Pvc Edge Banding For Office Furniture Henan Shunbang Chemical Industry CO.,Ltd , https://www.pvcresinchemical.com
A variety of parking conditions are often seen near the parking lot or parking space. I believe this is also a worry and fear for many novices. How do you change the status quo of a frightened, skating-looking company? Everyone compares parking to the tests that are often accepted in driving. Therefore, today Xiaobian wants to share with you the basic skills of novice parking and storage skills. Let's consolidate it.
What is the difficulty of parking? It is not only necessary to operate the accelerator, brake, and direction, but also to test your judgment on the entire vehicle's safety range and trajectory. Poor parking will not only lose face, affect mood, but also a waste of time or let the car hurt ... ... then, how can we practice a hard time, to do accurate and beautiful parking?
To become a master of parking, the first is to know the six "key position lines" on a car.
The six lines are the front and rear bumpers, the sides of the car body, and the front and rear axles. The front and rear bumpers and the sides of the car body determine the required position in parking, that is, the safety range; the front and rear axles determine the trajectory of the vehicle. If you can judge on the driver's seat (more accurately, "feel") the position of the six lines, not only can you determine whether the parking space is sufficient, but also predict the vehicle's trajectory, parking will also be more effective.
How to accurately determine the position of these six lines? The front bumper and front axle are located in front of the driver's seat and are relatively easy to determine. The other four lines need to be observed through the rearview mirror, so the rearview mirror has a great role in parking.
After understanding the "six key lines", we must also understand the principle of low-speed car movement. All cars are front-wheel steering and rear-wheels are followed by the front wheels. The front wheels have a greater “side-shifting†capability than the rear wheels. Therefore, the principle of parking is to have the rear wheels first and then the front wheels. In other words, most of the time we recommend parking by parking in reverse, so parking technology is largely a reversing technology.
Finally, you should also master some of the basic features and conditions of the vehicle. For example, what is the approximate minimum turning radius of the car? How to quickly adjust the rearview mirror? Is the reversing radar or reversing display reliable and has blind spots? How much is the height of the tire and the rim, whether it is easy to rub to the shoulder and damage ... ... and so on.
Is your basic skill solid enough? I hope today's explanation can help you. Because only solid basic skills can make you the ultimate master of parking.