Greenhouse Heating And Cooling Heat Pump Introduction to GENT greenhouse heating and cooling heat pump Greenhouse heating and cooling heat pump can prepare cold or hot water by absorbing heat from the air to achieve indoor cooling or heating. Agricultural greenhouses also have this cooling and heating demand, so air source aircon heat pump can be used in agricultural greenhouses. Unit Function 1. Greenhouse temperature control This air conditioner and heat pump can provide a constant temperature for the greenhouse throughout the year, especially in cold winters or areas with large temperature differences between day and night. Through the intelligent control system, the temperature in the greenhouse can be adjusted according to the growth needs of different crops to ensure that the crops grow in the most suitable environment. 2. Precise environmental control This heat pump for ac combined with intelligent control systems can monitor and adjust parameters such as temperature and humidity in the greenhouse in real time to ensure environmental stability. This precise environmental control helps improve the quality and yield of crops. Unit features 1. Energy saving and environmental protection This aircon with heat pump achieves cooling and heating in greenhouses by absorbing heat from the air instead of burning fuel, which significantly reduces energy consumption and reduces environmental pollution. Compared with traditional coal-fired boilers or electric heating systems, heat pump and air conditioning unit have a higher energy efficiency ratio and significant energy-saving effect. 2. Significant economic benefits Although the initial investment of Heat Pump Heating And Air Conditioning unit is high, the long-term operating cost is low, especially in the context of rising energy prices, its energy-saving advantage is more obvious. In addition, by improving crop quality and yield, the overall benefits of agricultural greenhouses will also increase significantly. air conditioner and heat pump,heat pump for ac,aircon heat pump,aircon with heat pump,heat pump for greenhouse GUANGZHOU GENT NEW ENERGY TECHNOLOGY CO., LTD , https://www.gentgz.com
Cdl Cdlf Vertical Multistage Stainless Steel Centrifugal Water Pump
**Product Specifications:**
- **Model No.:** CDL CDLF4
- **Pump Shaft Position:** Vertical Pump
- **Pump Casing Joint:** Vertical Joint Surface Pump
- **Mounting Height:** Suitable for Irrigation Centrifugal Pumps
- **Impeller Type:** Open Impeller
- **Usage:** Pump, Pumps, Condensate Pump, Circulating Pump
- **Application:** Submersible Pump, Clarified Water Pump, Water Treatment
- **Performance:** Automatic Pump
- **Trademark:** JR
- **Transport Packaging:** Standard Export Wooden Case
- **Specification:** As per customer requirements
- **Origin:** China
- **HS Code:** 8413709990
---
**Vertical Multistage Centrifugal Pump – High Pressure Water Pump**
**Introduction:**
The CDL CDLF vertical multistage stainless steel centrifugal pump is manufactured using advanced global technology. It combines an outstanding hydraulic design, high efficiency, and energy-saving performance. The impeller, casing, and other main components are made of stainless steel, ensuring smooth flow channels and long service life. The bearing shell and sleeve are constructed from hard alloys to enhance durability and prevent secondary pollution. The shaft seal uses a wear-resistant mechanical seal to ensure excellent leak-tightness.
**Product Details:**
| Feature | Description |
|--------|-------------|
| Working Principle | Centrifugal, Multi-stage |
| Main Applications | Water |
| Driver | Electric Motor |
| Power Specs | 220V/380/415V 3-phase; 220/240V 1-phase; 50Hz/60Hz |
| Max. Permissible Fluid Temperature | 80°C / 120°C (Hot Water Type) |
| Connection Type | Flange Connection |
| Installation Position | Vertical |
| Impeller/Diffuser/Shaft Material | Stainless Steel 304 or 316 |
| Shaft Seal Type | Mechanical Seal |
| Maximum Drive Rating | 110KW (150HP) |
| Maximum Caliber | 150mm (6-inch) |
| Maximum Discharge Pressure | 2.55MPa (25.5bar) |
| Maximum Head | 255m (836.4ft) |
| Flow Rate Range | 1–240 m³/h (4.4–1056 US GPM) |
**Applications:**
This pump is ideal for a wide range of applications, including:
1. **Water Supply:** Filtering and transporting water in municipal systems, boosting main pipelines, and high-rise building water supply.
2. **Industrial Use:** Process water systems, cleaning systems, high-pressure washing, and fire fighting systems.
3. **Liquid Conveyance:** Cooling and Air Conditioning systems, boiler water supply, condensing systems, acids, and alkalis.
4. **Water Treatment:** Ultrafiltration, reverse osmosis, distillation, and swimming pool systems.
5. **Irrigation:** Farmland irrigation, spray irrigation, and drip irrigation.
**Operating Conditions:**
- Liquid must be thin, clean, non-flammable, and non-explosive with no solid particles or fibers.
- Temperature Range:
- Normal type: -15°C to +70°C
- Hot water type: -15°C to +120°C
- Ambient temperature: Up to +40°C
- Altitude: Up to 1000 meters
**Maximum Working Pressure:**
The pressure and temperature limits are illustrated in the figure below. Ensure operation remains within these boundaries.
**Performance Curve:**
The following conditions apply to the performance curves shown:
1. All curves are based on 50Hz measurements with constant motor speed (2900rpm or 2950rpm).
2. Curve tolerance conforms to ISO9906 Annex A.
3. Measured with 20°C air-free water at a kinematic viscosity of 1 mm²/s.
4. Operation should follow the thickened curve to avoid overheating or motor overload due to improper flow rates.
**Section Drawings:**
[Image: Section drawing CDL/CDLF1,2,3,4]
[Image: Section drawing CDL/CDLF8,12,16,20]
[Image: Section drawing CDL/CDLF32,45,64,90]
[Image: Section drawing CDL/CDLF120,150,200]
**Packing:**
[Image: Packing details]
**Frequently Asked Questions (FAQ):**
**Q1: Are you a factory or a trading company?**
A: We are a factory with a dedicated sales team for trade services.
**Q2: Can I get a sample before placing an order?**
A: Yes, samples can be provided, but they are not free.
**Q3: Where is your factory located? How can I visit?**
A: Our factory is located in Ningbo, China. You can fly directly to Ningbo or Shanghai airport. All our clients, both domestic and international, are welcome to visit us.
**Q4: How do you handle quality control?**
A: Quality is our top priority. We implement strict quality control throughout the entire production process. Our factory has obtained ISO9001 certification.
**Q5: What is the lead time?**
A: Typically 10–50 days after receiving the prepayment.
**Q6: What payment methods do you accept?**
A: For small sample shipments, we accept PayPal or T/T. For large orders, T/T at sight is preferred.
**Q7: Is OEM available?**
A: Yes, we offer OEM and ODM services for all our products.
If you need detailed drawings, we can provide them upon request. Feel free to contact us for more information or assistance.
Therefore, agricultural greenhouse breeders with cooling and heating needs can consider using this heat pump for greenhouse.