85% Material Utilization of Metal Stamping

October 04, 2018

Process: Separation Process
Industry: Metal Stamping Parts
Tolerances: 0.02mm
Customized: Customized
Lead Time: 30 Days
Tolerance: +/- 0.002
Origin: China
Process: Separation Process
Industry: Metal Stamping Parts
Tolerances: 0.02mm
Customized: Customized
Lead Time: 30 Days
Tolerance: +/- 0.002
Origin: China
Application:

85% Material Utilization of Metal Stamped Parts

85% Material Utilization of Metal Stamping

Caracteristics:
 
Material C2680
Material Thickness .01″
Type Female
Plating Gold
Plating Thickness 1u"
Picth 1.0mm
Stamping Speed 600SPM
Dimension Tolerence +/-0.02mm
Faltness +/-0.05mm
Ture Position Tolerence +/-0.05mm
Verticality +/-0.05mm
Straightness +/-0.05mm
 

- Tooling material with points A,B and two belts ( while out ), can produce 16pcs per stroke.
- A, B terminals on the plug way deep in the tooling layout, material utilization of 85% ( high utilization).
- Tooling design clever, size can be mold trimming mode, production without frequent lower tooling.
- Entire die bold innovation, a Chinese patent.

Company Profile:

Dongguan Huisoelec Limited excels at high-volume production of tight-tolerance precision metal stamping. Through proven manufacturing processes and industry-leading technology, we are able to create innovative solutions for your most complex component needs. Our precision stamping begins with high quality progressive dies.

All of our presses are equipped with electronic sensors, allowing us to run production consistently and safely at maximum speeds with minimum downtime.

Straight-sided presses ranging from 25 - 260 tons, imported from Taiwan and Japan, equipped with precision feeders, are capable of running speeds from 60 - 1500 spm. Dimension tolerence can be controled within +/-0.007mm, blanking thickness ranges from 0.04mm to 3.2mm; Piloting hole is φ0.08 min.

Yamada Dubby presses ranging up to 30 tons; ideal for coining difficult, tightly toleranced components in materials such as stainless steel, low-carbon steel, and copper alloys.  Parts may be ordered unplated, preplated, or postplated, packaged in bulk or on reels. Part quality strictly controled by our experienced QC staffs.

Not sure your products requirements? Directly send us all the information you know(CAD/3D drawing/Solid picture), the engineer team will provide the best solutions. Contact us now!

 

www.huisoelec.com Application:

85% Material Utilization of Metal Stamped Parts

85% Material Utilization of Metal Stamping

Caracteristics:
 
Material C2680
Material Thickness .01″
Type Female
Plating Gold
Plating Thickness 1u"
Picth 1.0mm
Stamping Speed 600SPM
Dimension Tolerence +/-0.02mm
Faltness +/-0.05mm
Ture Position Tolerence +/-0.05mm
Verticality +/-0.05mm
Straightness +/-0.05mm
 

- Tooling material with points A,B and two belts ( while out ), can produce 16pcs per stroke.
- A, B terminals on the plug way deep in the tooling layout, material utilization of 85% ( high utilization).
- Tooling design clever, size can be mold trimming mode, production without frequent lower tooling.
- Entire die bold innovation, a Chinese patent.

Company Profile:

Dongguan Huisoelec Limited excels at high-volume production of tight-tolerance precision metal stamping. Through proven manufacturing processes and industry-leading technology, we are able to create innovative solutions for your most complex component needs. Our precision stamping begins with high quality progressive dies.

All of our presses are equipped with electronic sensors, allowing us to run production consistently and safely at maximum speeds with minimum downtime.

Straight-sided presses ranging from 25 - 260 tons, imported from Taiwan and Japan, equipped with precision feeders, are capable of running speeds from 60 - 1500 spm. Dimension tolerence can be controled within +/-0.007mm, blanking thickness ranges from 0.04mm to 3.2mm; Piloting hole is φ0.08 min.

Yamada Dubby presses ranging up to 30 tons; ideal for coining difficult, tightly toleranced components in materials such as stainless steel, low-carbon steel, and copper alloys.  Parts may be ordered unplated, preplated, or postplated, packaged in bulk or on reels. Part quality strictly controled by our experienced QC staffs.

Not sure your products requirements? Directly send us all the information you know(CAD/3D drawing/Solid picture), the engineer team will provide the best solutions. Contact us now!

 

www.huisoelec.com

Other Escalator And Travellator Parts

Home Escalator,Residential Escalator,Ladder Escalator

STAR Imp & Exp Co., Ltd. , http://www.hzelevator.com